山東恒美百特時產4-6噸木屑顆粒生產線，3D動畫演示視頻。

顆粒生產階段

Stages of pellet making

一般情況下，需要用一條完整的生產線來生產顆粒。顆粒生產的技術包括以下步驟：削片、粉碎顆粒機、篩分、烘干、制粒、冷卻和包裝。

As a rule, a complete pellet line is used in order to produce pellets. The technolog顆粒機y of pellet making consists of following steps: crushing, screening, drying, pelletizing, cooling an顆粒機d packing.

因此，需要各種不同的設備來完成這些步驟。這些設備包括剝皮機或削片機、錘式粉碎機、烘干機、顆粒機（壓塊機）、冷卻和包裝機。

So, different kinds of equipme顆粒機nt are required to accomplish them. This equipment includes debarker or chipper, hammer mill, dryer,顆粒機 pellet mill (press), cooling and packing machines.

制粒設備

Units of pelleting equipment

立式環模顆粒機

立式環模顆粒機特點：顆粒機

1、垂直進料，不易堵塞；

2、模具立式靜止安裝；雙層上下兩用，降本增效；

3、壓輪高速旋轉，產生離心力，使物料分布均勻；

4、兩套潤滑系統，保證設備運轉部件潤滑充分；

5、降溫除塵，達到制粒室的溫度恒溫效果，顆粒機減少部件高溫油脂溢出或積碳結塊，破壞潤滑系統的運行

1, vertical feed, not easy jam;

2, mold the vertical static installation; Do顆粒機uble up and down dual-use, authors efficiency;

3, pressure wheel at high speed, centrifugal force, un顆粒機iform distribution of material;

4, two sets of lubrication system, ensure the equipment running parts顆粒機 lubrication fully;

5, cooling dust to granulating chamber temperature constant temperature effect, r顆粒機educe overflow or carbon parts of high temperature grease agglomerate, damage the operation of the l顆粒機ubrication system

木片機

1.機器由基座、刀輥、上下喂料機構、送料裝置和液壓緩沖系統及電氣控制系統所組成。進料裝置分皮帶輸送機或振動給料機兩種；皮帶機由下喂料輥電機帶動。

2.上喂料輥轉動顆粒機方向與刀輥相同，下喂料輥轉動方向與刀輥相反。滾齒錯開，能夠使碎屑得到清理。

3.刀輥是木片機的工作部件，由鋼板焊接而成。具有較好的剛性和慣性矩，并經過動平衡檢測。

4.切削過程是由飛刀和底刀來完成的，飛刀顆粒機和底刀的間距要保持在0.5-1mm。

5. 切削后的木片尺寸為30mm左右

6.適用于大直徑的木頭，樹枝，木板等

1. The machine consists of base, knife roller,顆粒機 the feeding mechanism, feeding device and the liquid

Pressure buffer system and electric control sys顆粒機tem. Feeding device belt conveyor or vibrating feeder two; Belt conveyor by the feed roller motor dr顆粒機ive

2. The feed roller rotation direction is the same as the knife roller, the feeding roller in cont顆粒機rast to the knife roller rotation. Hob stagger, can make debris is cleared.

3. The knife roller is wo顆粒機od machines working parts, by the steel plate welded together. Has good rigidity and moment of inert顆粒機ia, and through dynamic balance test.

4. The cutting process is accomplished by the fly cutter and bo顆粒機ttom knife, fly cutter and bottom knife spacing must keep in 0.5 1 mm.

5. After cutting the wood size顆粒機 is around 30 mm

6. Suitable for large diameter logs, branches, wood, etc

多功能粉碎機

1.結構合理，轉子經過動平衡檢測，運行平穩；顆粒機

2.機器外殼增加加強筋，保證機器工作時的穩定性；

3.進料口上方焊有螺紋鋼，提高生產效率。它的作用：a. 增大碰撞率，提高效率；b.保護篩片；

4.適用范圍廣，進料口可根據物料的尺寸來選擇朝上或朝一側，因顆粒機此可以粉碎一些長的細的物料，例如樹枝，各類農作物秸稈等；

5.此機器可添加水冷卻系統，在機器工作時同時對機器進行冷卻，保證機器長期工作的穩定；此功能只應用于PVC板的粉碎

6.本系列粉碎機主要適用于能源顆顆粒機粒行業

1. Reasonable structure, rotor dynamic balance test, smooth operation;

2. The machine shell increa顆粒機se stiffener, guarantee the stability of the machine to work;

3. The above feeding port has rebar wel顆粒機ding, improve production efficiency. Increase its role: a. collision rate, improve the efficiency; B顆粒機. protection screen pieces;

4. The applicability is wide and inlet can choose according to the size o顆粒機f the material up or toward the side, so you can crush some long thin material, such as branches, al顆粒機l kinds of crops straw, etc.;

5. This machine can add water cooling system, cooling for the machine w顆粒機hen the machine is working, ensure the stability of the machine work for a long time; This function 顆粒機only applies to the shattering of the PVC board

6. This series of crusher is mainly used in the indus顆粒機tries of energy particles

烘干機

因為新鮮原木含有豐富的水分，所以加工前應對它們進行干燥。同時，水分太容易蒸發，這使處理的材料縮水、發霉或出現其他問題。因此，用這種材料制成的顆粒顆粒機質量不好。這就是為什么需要烘干機為進一步造粒準備材料。通常，適當?shù)乃趾繎獮?2-17％。

As fresh wood logs contain significant amount of moist顆粒機ure, they should be dried before processing. At the same time, moister evaporates too easily, which 顆粒機makes handled material shrunk, mildewed or spoiled in any other way. Consequently, pellets, made of 顆粒機such material, are of low quality. That is why drying machine is required to prepare material for th顆粒機e further stages of pelletizing process. As a rule, an appropriate moisture content should equate 12顆粒機-17 per cent.

有兩種類型的烘干機：滾筒式木屑烘干機和導管式木屑烘干機。第一種是普通類型，被廣泛應用于顆粒廠。它的容量從2.5-36噸不等。同時，導管式木屑烘干機的容量不是那么高;然而，這種顆粒機類型的烘干機的優點是低能耗和低成本。

There two types of dryers: rotary sawdust (drum) drying machine and pipe sawdust d顆粒機ryer. The first one is a common type and is widely used in pellet plants. Its capacity varies from 2顆粒機.5 to 36 tonnes. At the same time, the capacity of pipe sawdust dryer is not so high; however, the a顆粒機dvantages of this type of dryer are low energy consumption and low cost.

顆粒機

應用于顆粒生產的主要階段。用先前處理好的原料制成顆顆粒機粒。顆粒機操作的原理是與粉碎機相反。粉碎機用來粉碎原木，而顆粒機被應用于生產更大、均勻的團塊。

Pellet mills, also known as pellet presses are applie顆粒機d at the main stage of pellet production. They are used to create pellets of previously processed ra顆粒機w material. The principle of pellet mill operation is opposite to hammer mill one. While hammer mill顆粒機 is used to pulp wood logs, pellet mill is applied to create larger, homogeneous mass.

有各式各樣的顆粒機，可分為兩顆粒機大類：大型和小型顆粒機。與此同時，大型顆粒機主要有兩種，包括平模和環模。一般情況下，立式環模顆粒機是最適合做生物質燃料的顆粒機。

Has all kinds of pellet machine, can顆粒機 be divided into two broad categories: large and small particles machine. At the same time, there ar顆粒機e two main types of large particles machine, including flat die and die. In general, vertical ring d顆粒機ie pellet machine is the most suitable for biomass fuel pellet machine.

冷卻機

在顆粒生產的最后階段，要運用到冷卻機。使用這種機器能顆粒機夠使顆粒溫度從80-90℃降到室內溫度。它還能使水分含量從17%-18%降到12%-13％。

In the final phase of grain production, and cooling ma顆粒機chine to use. Using this machine can make particle temperature from 80-90 ℃ to room temperature. It 顆粒機also can make the moisture content from 17% to 17% to 12% - 13%.

1、SKLN系列逆流式冷卻器是我單位開發研制成功的新一代冷卻設備,

主要用顆粒機于制粒后高溫顆粒的冷卻。

2、該機具有獨特的冷卻機理,冷卻風與顆粒物料逆向運動,使物料由下

而上逐漸得到冷卻,避免了一般立式冷卻器因聚冷所造成的顆粒表面開

裂,心部水分和熱量在冷卻時間內難以散發以及易碎等缺顆粒機點。

3、該機采用振動鎖緊裝置，提高了冷卻效果、降低了顆粒破碎率、根

除了顆粒變硬后冷卻器無法工作的弊病，同時降低了功耗。冷卻效果優

于國內現有產品,并超過國家標準。冷卻后的料溫不高于室溫+5℃,降水

率不低顆粒機于3.8%,對生產高質量的顆粒飼料,延長顆粒儲存時間,提高經濟效

益起到了卓越的作用。

4、該機產量大,冷卻效果好,自動化程度高,噪音低,維修少,國外先進國

家廣泛采用該機型,是高級取代型冷卻設備。

1, S顆粒機KLN series counterflow cooler is my unit development and successfully developed a new generation of 顆粒機cooling equipment,

It is mainly used for granulating high-temperature particles after cooling.

2, this顆粒機 machine has a unique mechanism of cooling, cooling air and particle material reverse motion, make t顆粒機he material from below

And gradually cool, avoid the general vertical cooler caused by poly cold surf顆粒機ace of the particles

Crack, the heart of moisture and heat in the cooling time is difficult to send o顆粒機ut and brittle faults.

3, the machine USES vibration locking device, improve the cooling effect, redu顆粒機ces the particle breaking rate, root

In addition to the disadvantages of particles harden after coole顆粒機r will not work at the same time reduces the power consumption. Optimal cooling effect

In the domesti顆粒機c existing products, and more than the national standard. After cooling the material temperature is 顆粒機not higher than room temperature + 5 ℃, precipitation

Rate of not less than 3.8%, the production high顆粒機 quality pellet feed, to extend the time of grain storage, improve the economic efficiency

Yi has pla顆粒機yed a prominent role.

4, the machine production is large, cooling effect is good, high degree of auto顆粒機mation, low noise, less maintenance, advanced foreign countries

Widely used in the model, replace typ顆粒機e cooling equipment is advanced.

贊是一種鼓勵 | 分享是最好的支持

山東恒美百特（http://www.keliji1688.com）主營：木屑顆粒機；秸稈顆粒機；生物質顆顆粒機粒機；燃燒機；木片機；粉碎機；烘干機；冷卻機；飼料機械；有機肥機械；移動式建筑垃圾破碎站。歡迎各界朋友來廠參觀考察。恒美百特，品質致勝。

關注山東恒美百特，獲取更多生物質顆粒行業最新信息。